[Contents] [Prev] [Next] [Index] [Report an Error]

IPv6 Profile-Based Configuration

The JUNOSe software enables you to use profiles to dynamically configure IPv6 interfaces. When you create an IPv6 profile, you can also include Neighbor Discovery route advertisement characteristics, which are then configured on the dynamically-created IPv6 interfaces.

You can include the following commands in IPv6 profiles to configure Neighbor Discovery route advertisement characteristics.

Command	Description
ipv6 nd	Enables Neighbor Discovery on an interface
ipv6 nd managed-config-flag	Sets the “ managed address configuration” flag in IPv6 router advertisements
ipv6 nd other-config-flag	Sets the “ other stateful configuration” flag in IPv6 router advertisements
ipv6 nd prefix-advertisement	Specifies which IPv6 prefixes are included in IPv6 router advertisements
ipv6 nd ra-interval	Configures the interval between IPv6 router advertisements
ipv6 nd ra-lifetime	Configures the router advertisement lifetime
ipv6 nd reachable-time	Configures the amount of time the router can reach an IPv6 node after a reachability confirmation event occurs
ipv6 nd suppress-ra	Disables router advertisement transmissions

For additional information about using IPv6 profiles to configure dynamic interfaces, see Creating an IPv6 Profile in Configuring IPv6 and JUNOSe Link Layer Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]