Enabling Source Address Validation Traps

The ip sa-validate trap-enable command enables the generation of traps for source address validation failure.

Note: To fully enable source address validation traps, you must also enable the IP trap category with the snmp-server trap enable command. See in JUNOSe System Basics Configuration Guide for more information.

ip sa-validate trap-enable

• Use to enable the generation of traps for source address validation failure on the router.
• You can specify a VRF context for which you want to enable trap validation for source address validation.
• Example

  host1(config)#ip sa-validate trap-enable

• Use the no version to disable the generation of source address validation failure traps on the router.
• See ip sa-validate trap-enable

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.