[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring IS-IS Interface-Specific Parameters

You can change IS-IS interface–specific parameters; most can be configured independently of other attached routers. You are not required to alter any interface parameters; however, some parameters must be consistent across all routers in your network. If you change certain values from the defaults, you must configure them on multiple interfaces and routers.

In the following command guidelines, many parameters are preset to a default value. If that parameter has been modified from its default, use the no version of the command to restore its default value.

[Contents] [Prev] [Next] [Index] [Report an Error]