[Contents] [Prev] [Next] [Index] [Report an Error]

Configuration Tasks

Configure Integrated IS-IS by completing the following tasks in the order presented. You must enable IS-IS. All other tasks are optional.

  1. Enable IS-IS.
  2. Configure selected IS-IS interface-specific parameters.
  3. Configure selected global IS-IS parameters.
  4. Configure selected IS-IS parameters for monitoring and debugging purposes.
  5. Configure IS-IS parameters to enable CLNS packets to be recognized by your router and to monitor CLNS information.
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.