Clearing IP Routes

The router enables you to clear the specified routing entries from the routing table. You must specify the IP address prefix and the mask of the IP address prefix to clear specific routes. You can later reinstall the routes you have cleared.

clear ip routes

• Use to clear specified IP routes according to an IP prefix or a VPN routing and forwarding (VRF) table.
• Use an asterisk (*) to clear all dynamic routes from the routing table.
• Example

  host1#clear ip routes *

• There is no no version.
• See clear ip routes

ip refresh-route

• Use to enable the owning protocols (BGP, IS-IS, OSPF) to reinstall routes removed from the IP routing table by the clear ip routes command.
• Example

  host1#ip refresh-route

• There is no no version.
• See ip refresh-route

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.