Index

[Contents] [Prev] [Next] [Index] [Report an Error]

ABRs (area border routers), OSPF

configuring area range    1,

defined    1,

access-list command

IS-IS    1,

OSPF    1,

access lists, IP

monitoring    1,

address commands, OSPF

address area    1,

address authentication key    1,

address authentication message-digest    1,

address authentication-none    1,

address cost    1,

address dead-interval    1,

address hello-interval    1,

address message-digest-key    1,

address network    1,

address passive-interface    1,

address priority    1,

address retransmit-interval    1,

address transmit-delay    1,

address commands, RIP

address    1,

address authentication key    1,

address authentication mode    1,

address receive version    1,

address send version    1,

address-family command    1,

address ranges

IS-IS    1,

Address Resolution Protocol.    See ARP

adjacencies, clearing IS-IS    1,

adjacency, OPSF    1,

adjacency levels, IS-IS    1,

displaying information on    1,

logging changes between    1,

administrative distance

IS-IS    1,

OSPF    1,

RIP    1,

aggregate addresses

IS-IS    1,

OSPF routing    1, 2,

area-authentication command    1,

area-authentication-key command    1,

area border routers.    See ABRs, OSPF

area commands

area    1,

area default-cost    1,

area range    1,

area stub    1,

area nssa    1,

area IDs (OSPF packets)    1,

area-message-digest-key command    1, 2,

areas, IS-IS    1,

areas, OSPF    1,

configuring    1, 2,

defining    1, 2,

stub areas    1, 2,

area virtual-link commands

area virtual-link    1,

area virtual-link authentication-key    1,

area virtual-link authentication message-digest    1,

area virtual-link authentication-none    1,

area virtual-link dead-interval    1,

area virtual-link hello-interval    1,

area virtual-link message-digest-key md5    1,

area virtual-link retransmit-interval    1,

area virtual-link transmit-delay    1,

ARP (Address Resolution Protocol)

ARP protocol    1,

hosts    1,

physical and logical addresses    1,

arp commands    1,

arp    1,

arp timeout    1,

See also show arp command

AS (autonomous system)    1,

AS boundary router

default route and    1,

OSPF    1,

authentication

configuring, OSPF    1,

IS-IS, halting    1,

IS-IS HMAC MD5    1, 2,

IS-IS key commands    1,

IS-IS MD5 packet timing    1,

IS-IS MD5 start and stop timing    1,

managing and replacing IS-IS keys    1,

OSPF    1,

OSPF modes    1,

RIP    1,

type    1,

authentication commands

authentication key    1,

authentication message-digest    1,

authentication mode    1,

authentication-key command    1,

authentication-none command    1,

autocost, OSPF routing    1,

automatic virtual link, OSPF    1,

automatic virtual-link command    1,

autonomous system boundary router (AS boundary router).    See AS boundary router

backbone area, OSPF    1,

bandwidth

OSPF interface cost by    1,

baseline commands

baseline clns    1,

baseline ip    1,

baseline ip ospf    1,

baseline ip rip    1,

baseline ip udp    1,

baseline ipv6 interface    1,

baseline tcp    1, 2,

BFD (Bidirectional Forwarding Detection)

RIP, configuring for    1,

BFD commands

ip route bfd-liveness-detection    1,

BGP/MPLS VPNs

interaction with OSPF    1,

BGP (Border Gateway Protocol)

community lists    1,

OSPF routing with    1,

black holes, avoiding IS-IS    1,

border routers, OSPF    1,

B-RAS applications

creating an IP profile    1,

creating an IPv6 profile    1,

broadcast addressing    1,

broadcast circuits, IS-IS    1,

broadcast storms    1,

CIDR (Classless Interdomain Routing)    1, 2,

classes of IP addresses    1,

Classless Interdomain Routing.    See CIDR

clear arp command    1,

clear ip commands

clear ip interface    1,

clear ip isis redistribution    1,

clear ip ospf redistribution    1,

clear ip routes    1,

clear ipv6 ospf redistribution    1,

clear ipv6 commands

clear ipv6 interface    1,

clear ipv6 ospf counters    1,

clear ipv6 ospf process    1,

clear isis commands

clear isis adjacency    1,

clear isis database    1, 2,

clear isis ipv6 redistribution    1,

CLNP (Connectionless Network Protocol)    1,

CLNS (Connectionless Network Service Protocol)

displaying    1,

defined    1,

clns commands    1,

clns configuration-time    1,

clns holding-time    1,

clns host    1,

See also show clns commands

community lists, BGP    1,

complete sequence number PDU.    See CSNP

Connectionless Network Protocol.    See CLNP

Connectionless Network Service Protocol.    See CLNS

connectionless protocols    1, 2,

connection-oriented protocols    1,

conventions

notice icons    1,

text and syntax    1,

cost

IS-IS interface    1, 2,

OSPF routing    1,

autocost    1,

default cost    1,

equal-cost multipath    1,

cost command    1,

cryptographic authentication, OSPF    1,

CSNP (complete sequence number PDU)    1,

CSNP interval, IS-IS interface    1,

customer support    1,

contacting JTAC    1,

database, OSPF    1,

datagrams, IP

defined    1,

fragmenting and reassembling    1, 2,

data path failure

detecting RIP    1,

dead interval, OSPF    1, 2,

dead-interval command    1,

debounce-time command    1,

debug commands    1, 2,

debug ip ospf    1,

debug ip rip    1,

debug isis    1,

debug-related information, IS-IS    1, 2,

default-information originate command

IS-IS    1,

OSPF    1,

RIP    1,

default-metric command    1,

default routes

cost, OSPF    1,

IP routing    1,

IS-IS routing    1, 2,

OSPF routing    1,

suppressing IS-IS    1,

description

adding to IP interfaces    1,

adding to IPv6 interfaces    1,

directed broadcast packets    1,

directed broadcasts, enabling    1,

directly connected networks    1,

disable command    1,

disable-dynamic-redistribute command

IS-IS    1,

OSPF    1,

RIP    1,

disable-incremental-external-spf command    1,

distance, RIP administrative    1,

distance commands    1,

distance    1,

distance ip    1,

distance ospf    1,

distribute-domain-wide command    1,

distribute-list command    1, 2,

documentation set

comments on    1,

domain, OSPF    1,

domain-authentication command    1,

domain-authentication-key command    1,

domain-message-digest-key command    1, 2,

domain-wide prefix distribution    1,

dropped packets, troubleshooting    1,

DRs (designated routers)

IS-IS routing    1,

OSPF routing    1,

dynamic hostname resolution, IS-IS    1,

dynamic route redistribution, disabling

in IS-IS    1,

in OSPF    1,

in RIP    1,

ECMP (equal-cost multipath)

IS-IS    1, 2,

OSPF    1, 2, 3,

RIP    1, 2,

IP    1, 2,

end system.    See ES

entry, routing table    1,

equal-cost multipath.    See ECMP

ES (end system)

hello packet rate    1,

neighbor information    1,

E-series routers

IP features    1,

IPv6 features    1,

IS-IS features    1,

Ethernet commands, interface fastEthernet    1,

Ethernet controllers    1,

exit-address-family command    1,

exit-remote-neighbor command    1,

exponential back-off SPF calculation, IS-IS    1,

external routes, OSPF    1,

fabric congestion    1,

flooded broadcast packets    1,

flooding    1,

forwarding table    1,

fragmenting IP datagrams    1, 2,

frequency command    1,

full spf, IS-IS    1,

full-spf-always command    1,

gateways    1,

global default metric, IS-IS    1,

global IP routing table    1,

graceful restart, IS-IS

commands.    See nsf commands

configuring    1,

monitoring    1, 2,

overview    1,

timers    1, 2,

group (multicast) addressing    1,

hashcheck process    1,

hash functions    1,

hello interval

IS-IS interface    1, 2,

OSPF interface    1, 2,

hello-interval command    1,

hello multiplier, IS-IS interface    1,

hello packet validity rate, IS-IS    1,

Hello protocol    1,

HMAC MD5

authentication, IS-IS    1,

IS-IS area-wide password    1,

IS-IS domain-wide password    1,

IS-IS password on the interface    1,

hold time

IS-IS    1,

IS-IS SPF    1,

SPF    1,

hop count    1,

hops, verifying for static routes    1,

configuring

example    1,

steps for    1,

overview    1,

hops-of-statistics-kept command    1,

host access routes on PPP interface    1,

hosts    1,

ICMP (Internet Control Message Protocol)

echo request packets

IP    1,

IPv6    1,

ICMP messages and    1,

icmp update-source command    1,

ignore-lsp-errors command    1,

IGP (interior gateway protocol)    1,

incremental SPF    1,

Integrated IS-IS routing    1,

interarea routes, OSPF    1,

interface commands

interface fastEthernet    1,

interface loopback    1,

interface ip    1,

interface ipv6    1,

interface-event-disable command    1,

interfaces

IPv6, enabling and disabling    1,

interior gateway protocol.    See IGP

intermediate system.    See IS

Intermediate System-to-Intermediate System.    See IS-IS

Internet addresses    1,

Internet Control Message Protocol    1, See ICMP

Internet Control Message Protocol.    See ICMP

Internet Layer, TCP/IP    1,

interval rate, LSP (IS-IS)    1,

intra-area routes, OSPF    1,

IP    1,

ARP protocol    1, 2,

assigning router IDs    1,

broadcast addressing    1, 2,

ECMP    1, 2,

functions of    1,

ICMP and    1, 2,

layers of    1,

monitoring    1,

profile    1,

reachability commands    1,

routing    1,

source address verification    1, 2,

ARP protocol    1,

E-series router features    1,

IP addresses    1,

classes of    1,

interfaces without (unnumbered)    1,

multinetting    1,

OSPF routing costs and    1,

primary

adding    1,

deleting    1,

router IDs and    1,

secondary

adding    1,

deleting    1,

ip commands    1,

clear ip ospf neighbor    1,

ip access-routes    1, 2,

ip address    1, 2,

ip alwaysup    1,

ip broadcast-address    1,

ip debounce-time    1,

ip description    1,

ip directed-address    1,

ip directed-broadcast    1,

ip disable-forwarding    1,

ip icmp update-source    1,

ip ignore-df-bit    1,

ip irdp    1, 2,

ip mask-reply    1,

ip mtu    1, 2,

ip multipath round-robin    1,

ip proxy-arp    1,

ip redirects    1, 2,

ip refresh-route    1,

ip route    1, 2,

ip router-id    1,

ip router isis    1, 2,

ip route-type    1, 2, 3,

ip route verify rtr    1, 2,

ip sa-validate    1, 2, 3,

ip share-interface    1, 2,

ip share-nexthop    1,

ip shutdown    1,

ip source-route    1,

ip speed    1,

ip split-horizon    1,

ip tcp adjust-mss    1, 2,

ip unnumbered    1, 2,

ip unnumbered loopback    1,

ip unreachables    1,

no ip interface    1,

See also show ip commands

IP interfaces

adding a description    1, 2,

clearing    1,

creating    1,

primary    1,

removing IP configuration    1,

setting a baseline    1,

shared    1,

sharing    1,

shutting down    1,

unnumbered    1,

ip ospf commands    1,

ip ospf authentication-key    1,

ip ospf authentication message-digest    1,

ip ospf authentication-none    1,

ip ospf cost    1,

ip ospf dead-interval    1,

ip ospf hello-interval    1,

ip ospf message-digest-key    1,

ip ospf network    1,

ip ospf priority    1,

ip ospf shutdown    1,

ip ospf transmit-delay    1,

ip ospf retransmit-interval    1,

ip ospf bfd-liveness-detection    1,

See also show ip ospf commands

IP profile, B-RAS    1,

IP profile, creating

access routes    1,

address    1,

auto-configure    1,

auto-detect    1,

directed broadcast    1,

filter-options-all    1,

IGMP    1,

ignore-df-bit    1,

inactivity-timer    1,

inspection    1,

mtu (maximum transmission unit)    1,

nat    1,

policy    1,

redirects    1,

route-maps    1,

source address validation    1,

tcp adjust-mss    1,

unnumbered    1,

virtual router    1,

IP redirects, enabling    1,

ip rip commands    1,

ip rip    1,

ip rip authentication key    1,

ip rip authentication mode    1,

ip rip receive version    1, 2, 3,

ip rip send version    1,

ip rip bfd-liveness-detection    1,

See also show ip rip commands

IP routing.    See routing, IP

IPv6

address, defining    1,

addressing

compression and    1,

prefix    1,

scope    1,

structure    1,

types of    1,

understanding    1,

configuring neighbor discovery    1,

configuring neighbor discovery with profiles    1,

configuring neighbor discovery with RADIUS    1, 2,

enabling and disabling    1,

headers

extensions    1,

standard    1,

instance, creating an    1,

interfaces

clearing    1,

managing    1,

unnumbered    1,

license    1, 2,

monitoring    1,

neighbor discovery, defining    1, 2,

neighbor discovery and profiles    1,

neighbors, creating    1, 2,

overview    1,

packet headers    1,

profile    1,

references    1, 2,

source address verification    1,

static routes and    1,

E-series router features    1,

ICMP and    1,

ping and    1,

traceroute and    1,

ipv6 commands

ipv6 address    1, 2,

ipv6 description    1,

ipv6 mtu    1,

ipv6 nd    1, 2, 3,

ipv6 nd dad attempts    1,

ipv6 nd managed-config-flag    1, 2,

ipv6 nd ns-interval    1,

ipv6 nd prefix-advertisement    1,

ipv6 nd ra-interval    1, 2,

ipv6 nd reachable-time    1, 2,

ipv6 nd suppress-ra    1,

ipv6 nd suppress-ra-source-link-layer    1,

ipv6 neighbor    1, 2, 3, 4, 5, 6,

ipv6 neighbor proxy    1,

ipv6 route    1, 2,

ipv6 router isis    1,

ipv6 routes    1,

ipv6 virtual-router    1,

ipv6 address    1,

ipv6 enable    1,

ipv6 nd    1, 2,

ipv6 neighbor    1, 2,

ipv6 route    1,

ipv6 unnumbered    1,

ipv6    1,

IPv6 interfaces

creating    1,

sharing    1,

ipv6 nd commands

ipv6 nd    1,

ipv6 nd active-solicitations    1,

ipv6 nd dad attempts    1,

ipv6 nd managed-config-flag    1, 2,

ipv6 nd ns-interval    1,

ipv6 nd reachable-time    1,

IPv6 neighbor discovery commands

ipv6 nd    1,

ipv6 ospf commands    1,

ipv6 ospf cost    1,

ipv6 ospf mtu-ignore    1,

ipv6 ospf priority    1,

ipv6 ospf retransmit-interval    1,

ipv6 ospf shutdown    1,

ipv6 ospf transmit-delay    1,

ipv6 ospf area    1,

ipv6 ospf bfd-liveness-detection    1,

ipv6 ospf dead-interval    1,

ipv6 ospf hello-interval    1,

ipv6 ospf network    1,

See also show ipv6 ospf commands

IPv6 profile, creating

address    1,

ipv6-virtual-router    1,

mld (multicast listener discovery)    1,

mtu (maximum transmission unit)    1,

nd (neighbor discovery)    1,

policy    1,

sa-validate    1,

unnumbered    1,

IPv6 routing with IS-IS    1,

IRDP (ICMP Router Discovery Protocol), enabling

ICMP messages and<    1,

IS (intermediate system)    1,

hello packet rate    1,

neighbor information    1,

IS-IS (Intermediate System-to-Intermediate System)

adjacencies, clearing    1,

avoiding black holes    1,

broadcast circuits    1,

circuit type    1,

configuring

default routes    1,

for MPLS    1,

global parameters    1,

interface-specific parameters    1,

redistribution    1,

configuring the router to be ignored    1,

displaying CLNS    1, 2,

ECMP    1,

enabling    1,

enabling for IPv6    1,

exponential back-off SPF calculation    1,

features    1,

global default metric

for active interfaces    1,

for passive interfaces    1,

graceful restart

and black hole avoidance    1,

configuring    1,

monitoring    1, 2,

overview    1,

timers    1, 2,

hello packet validity rate    1,

HMAC MD5 authentication

for level 1 packets    1,

for level 2 packets    1,

on the interface    1,

Integrated IS-IS    1,

IPv6 routing    1,

level 1 routing    1,

level 2 routing    1,

LSPs.    See LSPs, IS-IS

metric, global default    1,

monitoring    1,

MPLS and    1,

network entity title    1, 2,

overload bit    1,

point-to-point circuits    1,

point-to-point-over-LAN circuits    1,

redistributing routes between levels    1,

route leaking    1,

router type    1,

routes

summarizing    1,

using for multicast RPF checks    1,

route tags

and route maps    1,

configuring    1,

defined    1,

for default routes    1,

for IS-IS interfaces    1,

for passive interfaces    1,

for redistribution    1, 2,

for summary routes    1,

monitoring    1,

overview    1,

unsupported features    1,

using    1,

routing levels/layers    1, 2, 3, 4,

SPF calculation    1,

starting and stopping MD5 packets    1,

suboptimal paths, correcting    1, 2,

summarizing routes    1,

suppressing default routes    1,

system identifier    1,

table maps

configuring    1,

defined    1,

overview    1,

topology elements    1,

traffic engineering    1,

troubleshooting    1,

dynamic hostname resolution    1,

network entity title    1,

isis commands    1,

isis authentication-key    1,

isis bfd-liveness-detection    1,

isis circuit-type    1,

isis csnp-interval    1,

isis hello-interval    1,

isis hello-multiplier    1,

isis hello padding    1,

isis lsp-interval    1,

isis mesh-group    1,

isis message-digest-key    1,

isis metric    1,

isis network point-to-point    1,

isis priority    1,

isis retransmit-interval    1,

isis retransmit-throttle-interval    1,

isis tag    1,

See also show isis commands

IS-IS protocol, OSPF routing with    1,

ISO 10589.    See IS-IS

ISO address    1,

is-type command    1,

leakage, OSPF route    1,

level 1 routing, IS-IS    1,

level 2 routing, IS-IS    1,

levels of IS-IS routing    1, 2, 3, 4,

license commands

license ipv6 command    1,

limited broadcast packets    1,

line modules

forwarding table on    1,

link-state advertisements.    See LSAs

link-state metrics, IS-IS    1, 2,

link-state packets.    See LSPs, IS-IS

liveness detection

RIP and BFD    1,

local routing table    1,

log-adjacency-changes command    1,

logical addresses    1,

LSAs (link-state advertisements)    1,

opaque LSAs    1,

retransmit interval and transmit delay    1, 2,

retransmit interval and transmit delay    1,

LSDB (link-state database)    1,

lsp-gen-interval command    1,

lsp-mtu command    1,

lsp-refresh-interval command    1,

LSPs (link-state packets), IS-IS

ignoring errors    1,

interval rate    1,

MTU    1,

overload bit    1,

refresh interval    1, 2,

retransmission interval    1,

retransmission throttle interval    1,

transmission interval    1,

MAC (media access control) addresses

and ARP    1,

defined    1,

manuals

comments on    1,

match commands

match-set summary prefix-tree    1,

maximum-paths command

IP    1, 2,

IS-IS    1,

OSPF    1,

RIP    1,

maximum transmission unit.    See MTU

max-lsp-lifetime command    1,

max-response-failure command    1,

MD5 authentication

enabling    1,

IS-IS    1,

OSPF    1, 2, 3,

mesh group, setting (IS-IS)    1,

message-digest-key md5 command    1,

message digests    1,

metric

OSPF default    1,

setting    1,

IS-IS global default    1,

IS-IS interface    1,

metric commands

metric    1,

metric-style commands

metric-style narrow    1,

metric-style transition    1,

metric-style wide    1,

mpls commands

mpls spf-use-any-best-path (IS-IS)    1,

mpls spf-use-any-best-path (OSPF)    1,

mpls traffic-eng (IS-IS)    1,

mpls traffic-eng area    1,

mpls traffic-eng router-id    1,

mpls traffic-eng router-id (IS-IS)    1,

MTU (maximum transmission unit)

IP    1, 2,

IPv6    1,

IS-IS    1,

OSPF    1,

multicast

addressing    1,

multihomed hosts    1,

multinetting    1,

ND (neighbor discovery)

overview    1,

neighbor commands

neighbor

OSPF    1,

RIP    1,

neighbor histories, OSPF    1,

neighboring routers, OSPF    1, 2,

neighbor uptime tracking, OSPF    1,

NET (network entity title)    1, 2, 3,

net command    1,

network, OSPF routing    1,

network area command    1,

network commands

network    1,

network entity title.    See NET

network interface layer (TCP/IP)    1,

network layer addresses    1,

network masks    1,

network service access point.    See NSAP

next-hop verification

configuring

example    1,

steps for    1,

overview    1,

no area command    1,

no ipv6 command    1,

nonbroadcast networks    1,

nonstop forwarding.    See graceful restart, IS-IS

notice icons    1,

not-so-stubby area, OSPF.    See NSSA

NSAP (network service access point)    1, 2,

NSF (nonstop forwarding).    See graceful restart, IS-IS

nsf commands

nsf ietf    1,

nsf interface wait    1,

nsf t1    1,

nsf t2    1,

nsf t3    1,

NSSA (not-so-stubby area), OSPF    1, 2,

null authentication, OSPF    1,

opaque LSAs, OSPF    1,

Open Shortest Path First.    See OSPF

operations-per-hop command    1,

OSPF (Open Shortest Path First)    1,

ABRs    1,

adjacency    1,

aggregate cost, optimizing    1,

areas    1, 2, 3,

areas, defining    1,

authentication

MD5    1,

simple password    1, 2,

autocost    1,

automatic virtual links    1,

backbone area    1,

BGP/MPLS VPNs and    1,

configuring

areas    1,

authentication    1,

incremental SPF    1,

interfaces    1,

NBMA networks    1,

remote neighbors    1,

traps    1,

creating interfaces    1,

database    1,

deleting interfaces    1, 2,

domain    1,

ECMP    1,

enabling    1,

interaction with BGP/MPLS VPNs    1,

link-local states    1,

MD5 authentication    1,

metrics, default    1,

MIB    1,

monitoring    1,

neighbor histories    1,

neighbor uptime tracking    1,

optimizing aggregate costs    1,

password authentication, simple    1, 2,

route leakage    1,

routes, using for multicast RPF checks    1,

routing costs    1,

routing priority    1,

stub area    1,

topology elements    1,

traffic engineering    1,

transmit delay    1, 2,

troubleshooting    1,

virtual links    1,

AS boundary router    1,

dead interval    1,

default cost    1,

SPF hold time interval    1,

transmit delay    1,

BGP and    1,

ospf commands    1,

log-adjacency-changes    1,

ospf auto-cost reference-bandwidth    1,

ospf enable    1, 2,

ospf log-adjacency-changes    1,

ospf shutdown    1,

See also show ip ospf commands; show ipv6 ospf commands

overload bit, IS-IS    1,

owner command    1,

packets, IP    1,

broadcast packets    1,

echo request and trace packets    1,

ICMP messages and    1,

IPv6 echo request and trace    1,

packet-switching networks    1,

parallel routes, maximum number of

IP    1, 2,

IS-IS    1,

OSPF    1,

RIP    1,

partial sequence number PDU.    See PSNP

passive-interface command    1, 2, 3,

passwords

IS-IS area authentication    1,

IS-IS authentication    1,

IS-IS domain authentication    1,

OSPF MD5 authentication    1,

OSPF simple password authentication    1, 2,

PDU (protocol data unit)    1,

physical addresses    1,

ping command    1, 2,

point-to-point circuits, IS-IS    1,

point-to-point-over-LAN circuits, IS-IS    1,

Point-to-Point Protocol.    See PPP

PPP (Point-to-Point Protocol)

host access routes    1,

primary IP addresses    1,

primary IP interface    1,

priority

IS-IS designated router    1,

OSPF routing    1, 2,

profile commands

profile    1, 2, 3,

profiles

assigning    1,

creating    1, 2,

protocol data unit.    See PDU

protocol number    1,

PSNP (partial sequence number PDU)    1,

reachability commands

IP    1,

reassembling IP datagrams    1,

receive-interface command    1, 2,

receive version command    1,

receiving interface, setting for RTR probes    1,

redirects, IP    1,

redistribute command

IS-IS    1,

OSPF    1, 2,

RIP    1,

redistribute isis ip command    1, 2,

redistributing routes between IS-IS levels    1,

redistribution policy (IP), monitoring    1, 2, 3,

redistribution routes

clearing all (IS-IS)    1,

disabling dynamic (IS-IS)    1,

disabling dynamic (OSPF)    1,

disabling dynamic (RIP)    1,

setting    1, 2, 3,

clearing all (OSPF)    1,

setting    1, 2,

reference-bandwidth command    1,

refresh interval, LSP (IS-IS)    1, 2,

reliable protocols    1, 2,

remote-neighbor command    1, 2,

remote neighbors

OSPF    1,

RIP    1,

request-data-size command    1,

request messages, RIP    1,

response messages, RIP    1,

Response Time Reporter.    See RTR

restart, graceful.    See graceful restart, IS-IS

retransmission interval, IS-IS    1,

retransmission throttle interval, IS-IS    1,

retransmit interval

and transmit delay    1, 2,

OSPF    1, 2,

retransmit-interval command    1,

RIB (routing information base]    1,

RIP (Routing Information Protocol)    1,

authentication    1,

BFD liveness detection and    1,

configuring    1,

debounce interval    1,

detecting path failures    1,

disabling dynamic route distribution    1,

ECMP    1,

maximum number of parallel routes    1,

message types    1,

monitoring    1,

purging learned routes    1,

purging the routing table    1,

remote neighbors    1,

request messages    1,

response messages    1,

route specificity    1,

route tags    1,

split horizon mechanism    1,

subnet masks    1,

summarizing routes    1,

triggered updates, disabling    1,

troubleshooting    1,

using routes for multicast RPF checks    1,

route leakage, OSPF    1,

route leaking between IS-IS levels    1,

route-map command    1, 2, 3,

route maps

and IS-IS route tags    1,

IP, monitoring    1,

router commands

router isis    1,

router ospf    1, 2, 3, 4,

router rip    1, 2,

router IDs    1, 2,

router type, IS-IS    1,

routes

summarizing IS-IS    1,

summarizing RIP    1,

using IS-IS    1,

using OSPF    1,

using RIP    1,

route tags, IS-IS

and route maps    1,

configuring    1,

for default routes    1,

for IS-IS interfaces    1,

for passive interfaces    1, 2,

for redistribution    1,

for summary routes    1,

overview    1,

unsupported features    1,

using    1,

defined    1,

monitoring    1,

route tags, RIP    1,

routing, IP    1, 2,

adding host route to peer on PPP interface    1,

default routes    1,

disabling forwarding of packets    1,

identifying a router    1,

maximum number of parallel routes    1, 2,

monitoring    1, 2, 3, 4,

next-hop verification    1,

routing operations    1,

routing tables    1,

source address validation    1, 2,

static routes    1, 2,

See also IP

routing, IPv6    1,

hop limit    1,

monitoring    1, 2, 3,

source address validation    1,

static routes    1,

See also IPv6

routing, IS-IS    1,

clearing redistribution information    1,

default route and routing domain    1,

designated routers    1,

integrated    1,

layers/levels of    1, 2, 3,

maximum number of parallel routes    1,

OSPF routing with    1,

route summarization    1,

routing domains    1,

setting redistribution routes    1,

specifying type (level)    1,

See also IS-IS

routing, OSPF    1,

area    1,

clearing redistribution information    1,

cost    1,

autocost    1,

default routing cost    1,

equal-cost multipath    1,

default route and routing domain    1,

displaying information about    1,

intra-area, interarea, external routes    1,

leakage    1,

maximum number of parallel routes    1,

network    1,

priority    1, 2,

See also OSPF

routing, RIP    1,

debounce interval    1,

maximum number of parallel routes    1,

purging the routing table    1,

route specificity    1,

triggered updates, disabling    1,

See also RIP

routing information base.    See RIB

Routing Information Protocol.    See RIP

routing table

entry    1,

global IP    1,

local    1,

RTR (Response Time Reporter)    1,

collecting history    1,

collecting statistics    1,

configuring    1,

monitoring    1,

next-hop verification    1,

options    1,

probe

configuring    1,

scheduling    1,

shutting down    1,

reaction conditions    1,

setting receiving interface    1,

rtr commands    1,

rtr    1

rtr reaction-configuration action-type    1

rtr reaction-configuration operation-failure    1

rtr reaction-configuration path-change    1

rtr reaction-configuration test-completion    1, 2

rtr reaction-configuration test-failure    1

rtr reset    1

rtr schedule    1

rtr schedule life    1

rtr schedule restart-time    1

rtr schedule start-time    1

See also show rtr commands

samples-of-history-kept command    1,

secondary IP addresses    1,

send-more-specific-routes-disable command    1,

send version command    1,

set-overload-bit command    1,

setting

administrative distance    1

metric    1

shared IP interfaces

configuring    1

primary interface    1

shared interface    1

shared IPv6 interfaces

configuring    1

shared interface    1

show access-list command    1,

show arp command    1,

show clns commands

show clns    1

show clns interface    1

show clns neighbors    1

show clns protocol    1

show clns traffic    1

show forwarding-table route-holddown    1,

show hosts command    1,

show ip commands

show ip    1

show ip address    1

show ip as-path-access-list    1

show ip community-list    1

show ip forwarding-table    1, 2

show ip interface    1

show ip interface shares    1

show ip protocols    1

show ip redistribute    1, 2

show ip route    1

show ip route slot    1

show ip socket statistics    1

show ip static    1

show ip tcp statistics    1

show ip udp statistics    1

show ip ospf commands

show ip ospf    1

show ip ospf border-routers    1

show ip ospf database    1

show ip ospf database link-local    1

show ip ospf database opaque-area    1

show ip ospf interface    1

show ip ospf internal-statistics    1

show ip ospf neighbors    1

show ip ospf remote-neighbor interface    1

show ip ospf spf-log    1

show ip ospf traffic    1

show ip ospf virtual-links    1

show ip rip commands

show ip rip    1

show ip rip brief    1

show ip rip database    1

show ip rip network    1

show ip rip stats    1

show ip rip summary-address    1

show ipv6 commands

show ipv6    1

show ipv6 address    1

show ipv6 neighbors    1

show ipv6 protocols    1

show ipv6 route    1

show ipv6 routers    1

show ipv6 static    1

show ipv6 traffic    1

show ipv6 udp statistics    1

show license ipv6    1

show ipv6 ospf commands    1,

show ipv6 ospf    1

show ipv6 ospf database    1

show ipv6 ospf interface    1

show ipv6 ospf internal-statistics    1

show ipv6 ospf neighbors    1

show ipv6 ospf summary-prefix    1

show isis commands

show isis database    1

show isis mpls adjacency-log    1

show isis mpls advertisements    1

show isis mpls tunnel    1

show isis nsf    1

show isis spf-log    1

show isis summary-addresses    1

show isis topology    1

show profile commands

show ip profile    1

show ipv6 profile    1

show profile brief    1

show route-map command    1,

show rtr commands

show rtr application    1

show rtr collection-statistics    1

show rtr configuration    1

show rtr history    1

show rtr hops    1

show rtr operational-state    1

show tcp commands

show tcp ack-rst-and-syn    1

show tcp path-mtu-discovery    1

show tcp paws    1

show tcp resequence-buffers    1

show tcp statistics    1

simple password authentication, OSPF    1, 2,

snmp commands

snmp trap ip link-status    1

source address validation traps    1,

source address verification    1, 2, 3,

SPF, incremental    1,

SPF (shortest path first) calculations    1, 2,

IS-IS    1

SPF hold time

interval    1

IS-IS    1

spf-interval command    1,

split-horizon command    1,

split horizon mechanism    1,

SRP modules

global IP routing table on    1

starting IS-IS MD5 packets    1,

static routes    1, 2,

establishing    1

monitoring    1

verifying next hops for    1

stopping IS-IS MD5 packets    1,

stub areas, OSPF    1, 2,

subnet addressing    1,

summarizing RIP routes    1,

summary-address command    1, 2,

summary addresses

IS-IS routing    1

OSPF routing    1, 2

summary-prefix command    1, 2,

supernets    1,

support, technical    See technical support

suppress-default command    1,

suppressing IS-IS default routes    1,

system identifier, IS-IS    1,

table

forwarding    1

global IP routing    1

local routing    1

table-map command

IS-IS    1

OSPF    1

RIP    1

table maps, IS-IS

defined    1

configuring    1

overview    1

tag command    1,

TCP/IP protocol suite

defined    1

layers of    1

TCP commands

tcp ack-rst-syn    1, 2

tcp mss    1, 2

tcp path-mtu-discovery    1, 2

tcp path-mtu-discovery black-hole-detect-threshold    1, 2

tcp path-mtu-discovery max-mtu    1, 2

tcp path-mtu-discovery min-mtu    1, 2

tcp paws-disable    1, 2

tcp resequence-buffers connection-maximum    1, 2

tcp resequence-buffers default-connection-maximum    1, 2

tcp resequence-buffers default-vr-maximum    1, 2

tcp resequence-buffers global-maximum    1, 2

tcp resequence-buffers vr-maximum    1, 2

technical support

contacting JTAC    1

text and syntax conventions    1,

timeout command    1,

timers

IS-IS graceful restart    1, 2

RIP    1

timers commands

timers    1

timers spf    1

time-to-live command    1,

TLV (type-length-value) for resolution of IS-IS dynamic hostname    1,

topology

IS-IS    1

OSPF    1

tos command    1,

trace packets    1, 2,

traceroute command    1, 2, 3, 4,

traffic, IP    1,

traffic engineering

and IS-IS    1

and OSPF    1

transmit delay, OSPF    1, 2,

transmit-delay command    1,

transport layer (TCP/IP)    1,

traps, OSPF    1,

traps command    1,

triggered-update-disable command    1,

troubleshooting

dropped packets    1

IS-IS    1

OSPF    1

RIP    1

ttl command    1,

type command    1,

type-length-value for resolution of IS-IS dynamic hostname    1,

UDP (User Datagram Protocol)    1,

undebug commands

undebug ip ospf    1

undebug ip rip    1

undebug ipv6 ospf    1

undebug isis    1

unnumbered interface

IP    1

IPv6    1

unreachable messages (ICMP)    1

unreliable protocols    1, 2, 3

update-source command    1, 2

User Datagram Protocol.    See UDP

validating source addresses    1, 2, 3

verifying next hops for static routes    1

virtual links, OSPF    1, 2, 3

virtual-router command    1

[Contents] [Prev] [Next] [Index] [Report an Error]