Setting a Baseline for VPLS Statistics

You can use the following baseline commands to set a statistics baseline for a VPLS instance, for a network interface associated with a VPLS instance, or for the VPLS virtual core interface associated with a VPLS instance. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.

Use the delta keyword with the show bridge commands display baselined statistics.

Tasks to set a baseline for VPLS statistics are:

•  Setting a Baseline for a VPLS Instance
•  Setting a Baseline for a Network Interface Associated with a VPLS Instance
•  Setting a Baseline for the VPLS Virtual Core Interface Associated with a VPLS Instance

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.