RSVP-TE Interface Profile Configuration Tasks and Commands

Creating or accessing an RSVP-TE interface profile places the CLI in RSVP Configuration mode. When you have completed the interface profile configuration tasks, you may want to proceed to the section MPLS Interface Configuration Tasks.

1. Access the desired profile configuration mode.

   host1(config)#mpls rsvp interface profile rsvp4

2. Configure interface profile settings to define the RSVP tunnel timeout period by specifying the timeout period in milliseconds between generation of RSVP refresh messages, the number of refresh messages that can be lost before the PATH or RESV state is ended, or both.

   host1(config-rsvp)#refresh-period 60000

   host1(config-rsvp)#cleanup-timeout-factor 9

Related Topics

• See MPLS Overview , RSVP-TE Messages and Sessions for more information about the RSVP tunnel timeout period
•  MPLS Global Configuration Tasks
•  MPLS Interface Configuration Tasks
•  MPLS Tunnel Configuration Tasks
•  MPLS Tunnel Profile Configuration Tasks
•  Additional LDP Configuration Tasks
•  Additional RSVP-TE Configuration Tasks
• cleanup-timeout-factor
• hello hold-time
• hello interval
• mpls ldp profile
• mpls rsvp profile
• refresh-period

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.