Import Maps

You can use an import map to change the attributes of a route when it is imported from the global BGP VPN RIB to a VRF. You can also use an import map to filter routes. If you associate an import map with a VRF, that VRF then accepts only received routes that pass the import map (and match the import route target list).

import map

• Use to apply an import route map to a VRF to modify and filter routes imported to the BGP RIB of the VRF from the global BGP VPN RIB in the parent VR.
• You can specify that only IPv4 or only IPv6 routes are imported. By default, both types of routes are imported.
• Example

  host1:boston(config-vrf)#import map routemap72

• Use the no version to remove the route map from the VRF.
• See import map.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.