Enabling and Setting a Baseline for MPLS Forwarding Table Statistics

To enable and set a statistics baseline for MPLS forwarding table entries:

1. Issue the mpls statistics label command to enable the statistics for a specific MPLS in label.

   host1#mpls statistics label 123

2. Issue the baseline mpls label command for a specific MPLS in label.

   host1#baseline mpls label 123

By default, statistics are enabled for incoming labels and RSVP-TE or LDP outgoing labels, but not for others such as BGP outgoing labels. Statistics are not stored in NVS.

When enabled, the following statistics are maintained for each forwarding table entry:

There is no no version for the baseline mpls label command. However, you can disable the forwarding table statistics.

To disable the statistics for a specific MPLS in label:

• Issue the no mpls statistics label command.

  host1#no mpls statistics label 123

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.