Configuring VPWS

This chapter describes how to configure virtual private wire service (VPWS) L2VPNs on the router, and contains the following sections:

• Before You Configure VPWS
• VPWS Configuration Tasks
• Configuring a VPWS Instance
• Configuring BGP Multihoming for VPWS
• Configuring Customer-Facing Interfaces in the VPWS Instance
• Configuring a Local Cross-Connect for VPWS
• Configuring the Loopback Interface and Router ID for BGP for VPWS
• Configuring BGP Signaling for VPWS
• Configuring MPLS LSPs for VPWS
• VPWS Configuration Example

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.