[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuration on CE2 (Remote CE Router)
Use the following commands on the remote CE router
(CE2) to configure the MPLS L2VPN tunnel over LAG shown in Figure 123.
- ! Configure a virtual router CE2
- host1(config)#virtual-router ce2
- !
- ! Specify a Gigabit Ethernet interface and assign an IP
address and mask to it
- host1:ce2(config)#interface gigabitEthernet
2/1/7
- host1:ce2(config-subif)#ip address 7.7.7.8
255.255.255.0
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
