[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Port Shaping

To configure port-shaping:

Configure the scheduler profile and the shaping rate.host1(config)#scheduler-profile 80mbps host1(config-scheduler-profile)#shaping-rate 80000000 host1(config-scheduler-profile)#exit
Configure a QoS profile, specify the node command, and reference the scheduler-profile.host1(config)#qos-profile 80mbps host1(config-qos-profile)#ethernet node scheduler-profile 80mbps host1(config-qos-profile)#exit
Attach the QoS profile to the port.host1(config)#interface fastethernet 2/0 host1(config-if)#qos-profile 80mbps

The sample configuration shapes Fast Ethernet port 2/0 to a rate no higher than 80 Mbps.

Using the following configuration, you can shape the corresponding HDLC channel down to 20 Mbps:



host1(config)#scheduler-profile 20mbps 

host1(config-scheduler-profile)#shaping-rate
20000000 

host1(config-scheduler-profile)#exit 

host1(config)#qos-profile 20mbps 

host1(config-qos-profile)#serial node scheduler-profile
20mbps 

host1(config-qos-profile)#exit 

host1(config)#interface serial 2/0:1/1 

host1(config-if)#qos-profile 20mbps

Configuring Port Shaping

Related Topics