[Contents] [Prev] [Next] [Index] [Report an Error]

Monitoring the QoS Configuration of ATM Interfaces

Purpose

Display ATM port queuing mode and QoS shaping mode status for a specific ATM interface.

Action

To display the QoS configuration on an ATM interface:

host1# show interfaces atm 2/0
ATM Interface 2/0 is up, line protocol is disabled
AAL5 operational status:       up
      time since last status change: 01:08:32
ATM operational status:        up
      time since last status change: 01:08:32
.
.
.....
InPackets:        0
InBytes:          0
InCells:          0
OutPackets:       7803262
OutBytes:         7803262000
OutCells:         163868502
InErrors:         0
OutErrors:        0
InPacketDiscards: 0
InByteDiscards:   0
InCellErrors:     0
Administrative qos-shaping-mode: frame
Operational qos-shaping-mode: frame
Administrative qos-mode-port: none
Operational qos-mode-port: none
Attached QoS profile: shaping

Meaning

Table 50 lists the related show interfaces atm command output fields.

Table 50: show interfaces atm Output Fields

Field Name	Field Description
Administrative qos-mode-port	Per-port queuing mode status: disabled, low-latency, low-cdv, none
Operational qos-mode-port	Per-port queuing mode status: disabled, low-latency, low-cdv, none
Administrative qos-shaping-mode	QoS shaping mode: disabled frame cell none
Operational qos-shaping-mode	QoS shaping mode: disabled frame cell none
Attached QoS profile	QoS profile attachment at or below the displayed interface. For example, if the interface being displayed is a VC, and the attachment is at the ATM AAL5 interface, the ATM AAL5 interface attachment is displayed.

Monitoring the QoS Configuration of ATM Interfaces

Purpose

Action

Meaning

Related Topics