Software Classifiers Overview

An E-series router supports a variety of software classifiers, depending on the type of interface. Table 16 and Table 17 list the supported software classifiers for each interface type.

A line module supports 16,383 software classifiers. Software classifiers are consumed at a rate of one resource per classifier category per policy. For example, if you configure a policy that has three different destination route class rules, then because all three rules are for the same classifier category, that policy consumes only one software classifier resource. However, if you configure a policy that requires classification on three different classifier categories, such as ToS, color, and TCP flags, then that policy consumes three of the available 16,383 software classifier resources.

Note: Policy consumption is per policy definition per line module.

In this example, the policy list named polWestford5 references four classifier lists with a combination of software and hardware classifiers.

For a given line module, the policy list named polWestford5 consumes a total of one FPGA hardware classifier resource and two software classifier resources, as indicated in Table 24.

Table 24: Resource Consumption

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.