 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
Display information about control plane policer for a specified protocol or all protocols.
To display information about control plane policer:
host1#show control-plane policer protocol
Burst
Rate Size Packets Packets
Protocol Enabled (pps) (pkts) Committed Exceeded
----------------------------- ------- ----- ------ ---------- ----------
PppEchoRequest false 50 50 0 0
PppEchoReply false 50 50 0 0
PppEchoReplyFast false 50 50 0 0
PppControl false 50 50 0 0
AtmControl false 50 50 0 0
AtmOam false 50 50 0 0
AtmDynamicIf false 50 50 0 0
AtmInverseArp false 50 50 0 0
FrameRelayControl false 50 50 0 0
FrameRelayArp false 50 50 0 0
PppoeControl false 50 50 0 0
PppoePppConfig false 50 50 0 0
EthernetArp false 50 50 0 0
EthernetArpMiss false 50 50 0 0
EthernetLacp false 50 50 0 0
EthernetDynamicIf false 50 50 0 0
Table 28 lists the show control-plane policer command output fields.
Table 28: show control-plane policer Output Fields
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |