[Contents] [Prev] [Next] [Index] [Report an Error]

tx-connect-speed-method

Syntax

tx-connect-speed-method { static-layer2 | dynamic-layer2 | qos | actual }

no tx-connect-speed-method

Release Information

Command introduced in JUNOSe Release 8.0.0.

Description

Configures for an AAA domain map (when used from Domain Map Tunnel Configuration mode) or for an AAA tunnel group (when used from Tunnel Group Tunnel Configuration mode) the method used to calculate the transmit connect speed of the subscriber’s access interface for establishing a tunneled L2TP session. This speed is reported in L2TP Transmit (TX) Speed AVP 24. The no version removes configuration of the transmit connect speed calculation method from the AAA domain map or AAA tunnel group.

Options

static-layer2—Calculates the transmit connect speed of the subscriber’s access interface based on statically configured settings for the underlying layer 2 interface
dynamic-layer2—Calculates the transmit connect speed of the subscriber’s access interface based on dynamically configured settings for the underlying layer 2 interface
qos—Calculates the transmit connect speed of the subscriber’s access interface based on settings determined by QoS
actual—Calculates the transmit connect speed of the subscriber’s access interface as the lesser of the dynamic-layer2 value or the qos value

Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]