snmp-server group

Syntax

snmp-server group groupName securityModel authenticationLevel [ read readView ]
[ write writeView ] [ notify notifyView ] [ storageType ]

no snmp-server group groupName securityModel authenticationLevel

Release Information

Command introduced in JUNOSe Release 7.1.0.

Description

Dynamically configures an SNMP server group. The no version removes the dynamically created group.

Note: You must access the CLI at privilege level 15 to view or use this command.

Options

• groupName—Name of the SNMPv3 group
• securityModel—Security model
  • v1—SNMPv1
  • v2c—SNMPv2c
  • usm—SNMPv3
• authenticationLevel—Method for authentication and privacy
  • none—No authentication and no privacy
  • auth—Authentication only
  • priv—Authentication and privacy
• readView—Name of the view for read access; the default is no access
• writeView—Name of the view for write access; the default is no access
• notifyView—Name of the view for notification; the default is no access
• storageType—Storage type
  • volatile—Loses contents on warm or cold start
  • nonvolatile—Preserves contents across warm or cold start. This is the default.

Global Configuration

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.