show ipv6 tunnel-route

show ipv6 tunnel-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ]
[ all ] [ protocol ] [ filter ]

Command introduced in JUNOSe Release 7.1.0.
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.

Displays current state of the IPv6 tunnel routing table.

vrfName—Name of the VRF
ipv6Address—IPv6 address
ipv6Prefix—Prefix of prefix list entry; in the format IPv6baseaddress / length; for example, 1::1/32
detail—Displays detailed information about the specific route
all—Displays all routes in the IPv6 tunnel routing table inserted from all protocols, not just the best routes
protocol—The following protocols for which you want to display the best route or all routes in the tunnel routing table; no routes are displayed if routes for the specified protocol are not present in the tunnel routing table

Note: Other protocol options are available in the CLI, but they are not applicable to the tunnel routing table.
- bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table
filter—See Filtering show Commands

Privileged Exec, User Exec