show ip rpf-route

Syntax

show ip rpf-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ]
[ all ] [ protocol ] [ filter ]

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Displays routes that the router can use to verify source addresses in multicast packets.

Options

• vrfName—Displays the contents of the IP routing table associated with a VRF
• destination—Specifies the IP address or domain name of the host to show
• ipMask—IP mask of the specific address to show
• detail—Displays detailed information about the specific prefix; currently shows the tag added by means of the ip route command
• all—Displays all routes in the routing table inserted from all protocols (not just the best routes that are used for forwarding)
• protocol—One of the following protocols for which you want to display the best routes in the routing table; no routes are displayed if routes for the specified protocol are not present in the routing table
  • access—Displays the best access-server routes (BGP) in the routing table
  • access-internal—Displays the best access-internal routes in the routing table
  • bgp—Displays the best BGP routes in the routing table
  • bgp-tunnel—Displays the best BGP tunnel routes in the routing table
  • dvmrp—Displays the best DVMRP routes in the routing table
  • isis—Displays the best IS-IS routes in the routing table
  • ldp—Displays the best LDP tunnel routes in the routing table
  • local—Displays the best locally connected routes in the routing table
  • mbgp—Displays the best MBGP routes in the routing table
  • ospf—Displays the best OSPF routes owned by in the routing table
  • other—Displays the best internal control routes in the routing table
  • rip—Displays the best RIP routes in the routing table
  • rsvp—Displays the best RSVP tunnel routes in the routing table
  • static—Displays the best static routes added by network management to the routing table
  • static-rpf—Displays the best static RPF routes added by network management to the routing table
• filter—See Filtering show Commands

Privileged Exec, User Exec

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.