[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
show ip bgp network
Syntax
To display information about a prefix configured for
all address families or for a specific address family other than the
route-target address family:
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4
vrf vrfName ]
network [ networkNumber [ [ mask ] networkMask ] ] [ filter ]
To display information about about a prefix configured for the
route-target address family:
show ip bgp route-target signaling network [ rtfPrefix ] [ filter ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
route-target signaling keywords and rtMemNlri variable added in JUNOSe
Release 9.0.0.
rtMemNlri variable replaced by rtfPrefix variable in
JUNOSe Release 9.1.0.
Description
Displays information about a potentially originated
prefix that was configured with the network command.
Options
- ipv4 unicast—Specifies the IPv4 unicast address
family and routing table; the default option
- ipv4 multicast—Specifies the IPv4 multicast address
family and routing table
- vpnv4 all—Specifies the IPv4 VPN address family
and all IPv4 VPN routing and forwarding instances
- vpvn4 vrf vrfName—Specifies
the IPv4 VPN address family and only the IPv4 VPN routing and forwarding
instance with the name vrfName
-
networkNumber—IP address of
the network for which you want information displayed; if no network
is specified, the fields are displayed for all networks
-
networkMask—Address mask to
be applied to the network address
- route-target signaling—Displays information for
only the route-target address family
-
rtfPrefix—Prefix representing
the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for
example, 320:320:524/36) where:
-
asNumber—AS number for origin
of route target information, in the range 1–4294967295
-
extendedCommunity—Two-part
number in the format number1:number2 that identifies an extended community of VPNs, in the format number1:number2, where:
-
number1—Autonomous system
(AS) number, in the range 1–4294967295, or an IP address
-
number2—Unique integer, in
the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number
-
prefixLength—Number that specifies
the length of the route prefix, in the range 32–96
-
filter—See Filtering show Commands
Privileged Exec, User Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
