show hdlc interface

Syntax

show hdlc interface [ { dataRestriction [ dataRestriction ]* } | full ]
[ delta ] [ stateRestriction ] [ { interfaceType } interfaceSpecifier ] [ filter ]

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Displays statistics about specified Cisco HDLC interfaces.

Options

• dataRestriction—Specify one or more of the following keywords:
  • config—Displays information about the HDLC interface configuration
  • status—Displays information about the HDLC interface operational status
  • statistics—Displays information about the HDLC interface statistics
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line
• full—Displays configuration, status, and statistics information; equivalent to specifying config status statistics
• delta—Displays baselined statistics
• stateRestriction—Specify only one of the following keywords:
  • open—Displays an interface that is administratively enabled, which means that the no ppp shutdown command is operational
  • closed—Displays an interface that is administratively disabled, which means that the ppp shutdown command is operational
  • up—Displays an interface that is up, which means that the LCP has been negotiated
  • down—Displays an interface that is down, which means that the LCP has not been negotiated, the negotiations have failed, or the connection has been terminated
  • lower-layer-down—Displays an interface that is not up and is waiting for the lower layer to come up to initiate negotiations for LCP
  • not present—Displays an interface on which traffic cannot flow because hardware is unavailable
• interfaceType—Interface type; see Interface Types and Specifiers
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• filter—See Filtering show Commands

Privileged Exec, User Exec

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.