[Contents] [Prev] [Next] [Index] [Report an Error]

redundant-port

Syntax

To specify a member interface with optional failover timeout and packet sampling settings:

[ no ] redundant-port interfaceType interfaceSpecifier [ [ failover timeout
failoverTime ] [ packet-sampling [ delay delayTime ] ] ]

To specify a member interface with optional auto-reversion, transmitter, and failover timeout settings:

[ no ] redundant-port interfaceType interfaceSpecifier [ [ auto-revert ] [ transmitter { on | off } ] [ failover timeout failoverTime ] ]

Release Information

Command introduced in JUNOSe Release 8.0.0.

Description

Specifies a member link of a LAG bundle as redundant. The no version disables the redundant status of the member link or disables the specified redundancy setting for the member link.

Options

interfaceType—Interface type; see Interface Types and Specifiers
interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
failoverTime—Time between the current link event leading to failover or reversion and the previous link failover or reversion, in the range 100-10000 milliseconds (ms)
packet-sampling—Enables packet sampling to determine a failed port
delayTime—Minimum time difference between redundant and active port samples, in the range 100–10000 milliseconds (ms)
auto-revert—Specifies that the failed port automatically resumes as active
on—Specifies the transmitter is enabled when port is in redundant mode
off—Specifies the transmitter is disabled when port is in redundant mode

Global Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]