[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
pppoe clear lockout interface
Syntax
pppoe clear lockout interface interfaceType interfaceSpecifier macAddress
Release Information
Command introduced in JUNOSe
Release 7.2.0.
Description
In configurations with dynamic PPPoE
subinterfaces over static PPPoE major interfaces, clears the lockout
condition configured for the individual PPPoE client associated with
the specified source media access control (MAC) address. There is
no no version.
Options
-
interfaceType—One of the following
interface types listed in Interface Types and Specifiers:
- atm
- fastEthernet
- gigabitEthernet
- lag
- serial—PPPoE is not currently supported on serial
interfaces
- tenGigabitEthernet
-
interfaceSpecifier—Particular
interface; format varies according to interface type; see Interface Types and Specifiers
-
macAddress—Source MAC address
of the PPPoE client; a unique 48-bit (6-byte) number that is programmed
into each LAN network interface card (NIC) at the time of manufacture;
also known as a hardware address or physical address. The MAC address
format is a dotted triple of four-digit hexadecimal numbers; for example,
0090.1a40.4c7c
Privileged Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
