[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
path ds3 t1 fdl
Syntax
path pathChannel ds3 ds3Channel t1 t1Channel fdl { ansi | att | all | none
}
no path pathChannel ds3 ds3Channel t1 t1Channel fdl [ ansi
| att | all ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Specifies the facilities data link (FDL) standard
for a T1 channel on a DS3 signal. This command applies to a T1 channel
on a DS3 over channelized SONET interface. The no version restores the default, none.
Options
-
pathChannel—Number, in the
range 1–2147483648, that identifies the path
-
ds3Channel—Number, in the
range 1–3, that identifies the DS3 channel
-
t1Channel—One or more individual
T1 channels, ranges of T1 channels, or combination of individual channels
and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
- ansi—Specifies ANSI T1.403 Standard for extended
superframe FDL exchange support
- att—Specifies AT&T Technical Reference 54016
for extended superframe FDL exchange support
- all—Specifies both the AT&T and ANSI mode for
extended superframe FDL exchange support
- none—Removes the current FDL mode settings
Controller Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
