[Contents] [Prev] [Next] [Index] [Report an Error]

path ds3 framing

Syntax

path pathChannel ds3 ds3Channel framing framingType

no path pathChannel ds3 ds3Channel framing

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Configures the framing format for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version restores the default value.

Options

pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the path
framingType—Choose one of the following:
- c-bit—Default; specifies C-bit parity framing
- m23—Specifies M23 multiplexer framing

Controller Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]