[Contents] [Prev] [Next] [Index] [Report an Error]

path ds3 equipment loopback

Syntax

path pathChannel ds3 ds3Channel equipment { customer | network } loopback

no path pathChannel ds3 ds3Channel equipment

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Enables or disables the router’s ability to be placed in loopback by a remote device connected at the DS3 layer for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version restores the default behavior, which disables the router’s ability to be placed in loopback by a remote device. Using the no version has the same effect as issuing the command with the network keyword.

Options

pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the path
customer—Enables the router to start loopback testing when it receives an appropriate signal from the remote interface
network—Disables the router’s ability to start loopback testing when it receives an appropriate signal from the remote interface; this is the default behavior

Controller Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]