[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
path ds1 fdl transmit
Syntax
[ no ] path pathChannel ds1 tributaryIdentifier fdl transmit
{ path-id
| idle-signal | test-signal }
no path pathChannel ds1 tributaryIdentifier fdl transmit
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Configures the router to send the specified FDL
message on a DS1 signal. This command applies to a DS1 over channelized
SONET or SDH interface. The no version
stops the router from sending the specified FDL message or all FDL
messages.
Options
-
pathChannel—Number, in the
range 1–2147483648, that identifies the path
-
tributaryIdentifier—Specifier
for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
-
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
-
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
-
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
- path-id—Transmits a path identification message
every second; default value is disabled
- idle-signal—Transmits an idle signal message every
second; default value is disabled
- test-signal—Transmits a test signal message every
second; default value is disabled
Controller Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
