[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
path ds1 fdl carrier
Syntax
[ no ] path pathChannel ds1 tributaryIdentifier fdl carrier
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Specifies that a DS1 signal is used in the carrier
environment. This command applies to a DS1 over channelized SONET
or SDH interface. The no version restores
the default situation, in which an interface does not operate in the
carrier environment.
Options
-
pathChannel—Number, in the
range 1–2147483648, that identifies the path
-
tributaryIdentifier—Specifier
for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
-
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
-
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
-
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
Controller Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
