[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
path ds1|e1 channel-group snmp trap link-status
Syntax
[ no ] path pathChannel { ds1 |
e1 } tributaryIdentifier
channel-group channelGroupNumber snmp trap link-status
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Enables SNMP link status processing on a DS1 or
an E1 channel group of channelized SONET and SDH interfaces. The no version disables SNMP link status processing on
a DS1 or an E1 channel group.
Options
-
pathChannel—Number, in the
range 1–2147483648, that identifies the path
-
tributaryIdentifier—Specifier
for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
-
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
-
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
-
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
-
channelGroupNumber—Either
a fractional T1 interface in the range 1–24 or a fractional
E1 interface in the range 1–31
Controller Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
