[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ospf log-adjacency-changes
Syntax
[ no ] ospf log-adjacency-changes
[ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ]
Release Information
Command introduced before JUNOSe
Release 7.1.0.
Description
Configures the router to send a system
log message when the state of an OSPFv2 neighbor changes. For OSPFv3
neighbors, use the log-adjacency-changes command. The no version turns off this
feature.
Options
- severity—Minimum severity of the log messages displayed
for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower
the number, the higher the priority:
- emergency or 0—System unusable
- alert or 1—Immediate action
needed
- critical or 2—Critical condition
exists
- error or 3—Error condition
- warning or 4—Warning condition
- notice or 5—Normal but significant
condition
- info or 6—Informational message
- debug or 7—Debug message
-
verbosityLevel—Specifies the
verbosity of the log category’s messages; can be any of the
following:
- low—Terse
- medium—Moderate detail
- high—Verbose
Router Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
