neighbor remote-as

Syntax

neighbor { ipAddress | ipv6Address | peerGroupName } remote-as number

no neighbor { ipAddress | ipv6Address } [ remote-as [ number ] ]

no neighbor peerGroupName remote-as [ number ]

Release Information

Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.

Description

Adds an entry to the BGP neighbor table. Specifying a neighbor with an AS number that matches the AS number specified in the router bgp command identifies the neighbor as internal to the local AS. Otherwise, the neighbor is considered external. This command takes effect immediately. The no version removes an entry from the table.

Options

• ipAddress—IP address of BGP neighbor
• ipv6Address—IPv6 address of BGP neighbor
• peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
• number—Number in the range 1–4294967295; the AS to which the neighbor belongs

Address Family Configuration, Router Configuration

Related Topics

• Configuring BGP Signaling for L2VPNs and Configuring BGP Signaling for VPLS in the JUNOSe BGP and MPLS Configuration Guide

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.