[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
neighbor peer-group
Syntax
Creating a peer group:
neighbor peerGroupName peer-group
no neighbor peerGroupName [ peer-group
]
Assigning members to a peer group:
neighbor { ipAddress | ipv6Address } peer-group peerGroupName
no neighbor { ipAddress | ipv6Address } peer-group [ peerGroupName ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
ipv6Address variable added
in JUNOSe Release 8.0.0.
Description
When used from Router Configuration mode without
specifying an IP address, creates a BGP peer group. The no version removes a peer group.
When used from Router Configuration mode with an IP address
or from Address Family Configuration mode, configures a BGP neighbor
to be a member of a peer group. The no version
removes a neighbor from a peer group.
 |
Note:
You cannot mix IPv4 and IPv6 peer members in a peer group.
Only one type peer is allowed, IPv4 or IPv6. For example, the following
error is generated if an IPv6 peer group member is added to a peer
group that already has IPv4 members; that is, where the peer-group
type is IPv4:
host1(config-router)#neighbor 1::1 peer-group hamburg
% Unable to set 'peer-group' for address family ipv4:unicast for peer 1::1 in core (IPv6 peer cannot be member of a peer-group of type IPv4)
|
Options
-
peerGroupName—Name of BGP
peer group
-
ipAddress—IP address of the
BGP neighbor that belongs to the peer group specified by the name
-
ipv6Address—IPv6 address of
the BGP neighbor that belongs to the peer group specified by the name
-
peerGroupName—Name of the
BGP peer group to which this neighbor belongs
Address Family Configuration, Router Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
