[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
neighbor maximum-prefix
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } maximum-prefix maximum
[ threshold ] [ strict ] [ warning-only ]
no neighbor { ipAddress | ipv6Address | peerGroupName } maximum-prefix
[ maximum ][ threshold ] [ strict ] [ warning-only ]
Release Information
Command introduced before JUNOSe
Release 7.1.0.
ipv6Address variable
added in JUNOSe Release 8.0.0.
Description
Sets the number of prefixes that can
be received from a neighbor. The no version
removes the maximum prefix limitation.
Options
-
ipAddress—IP address of BGP
neighbor
-
ipv6Address—IPv6 address of
BGP neighbor
-
peerGroupName—Name of the
BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group
inherit the characteristic configured with this command, unless it
is overridden for a specific peer.
-
maximum—Maximum number of
prefixes; default value is no limit
-
threshold—Percent of maximum
at which to log a warning in the range 0–100; default value
is 75
- strict—Checks the maximum prefix limit against all
received routes rather than the default behavior of checking it only
against accepted routes
- warning-only—Causes BGP software to log a warning,
rather than reset the connection if the maximum or threshold value is exceeded
Address Family Configuration, Router Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
