mpls topology-driven-lsp ip-interfaces

Syntax

[ no ] mpls topology-driven-lsp ip-interfaces [ egress | ingress ]
[ { access-list | prefix-list } listName ] [ host-only ]

no mpls topology-driven-lsp ip-interfaces [ egress | ingress ] [ host-only ]
[ policy-list ]

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Specifies LSPs to be put into the IP routing table for forwarding plain IP traffic. The no version removes the LSPs from the table.

Note: This command is deprecated and may be removed completely in a future release. The function provided by this command has been replaced by the ldp ip-forwarding command.

Options

• egress—Has no effect
• ingress—Has no effect
• access-list—Specifies that listName is an access list
• prefix-list—Specifies that listName is a prefix list
• listName—Name of access list or prefix list that specifies LSPs over which IP interfaces are created
• host-only— Specifies that only LSPs to host addresses are added to the IP routing table
• policy-list—Removes previously applied access lists or prefix lists

Global Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.