[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
maximum routes
Syntax
maximum routes limit { warningThreshold | warning-only }
no maximum routes
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets a warning threshold and maximum limit for
routes imported by a PE router into a VRF from associated CE routers.
The no version removes the limit and warning
threshold.
Options
-
limit—Number in the range
1–4294967295 that when exceeded prevents routes from being imported
into the routing table; when first exceeded generates a limit-exceeded
log entry; if the route count fluctuates below and up to this value,
an interval of five minutes must pass before another limit-exceeded
log entry can be generated
-
warningThreshold—Percentage
in the range 1–100 that when first exceeded generates a warning-threshold-exceeded
log entry; if the route count fluctuates around this value, an interval
of five minutes must pass before another warning-threshold-exceeded
log entry can be generated
- warning-only—Causes the limit to function as a warningThreshold; specifies
that exceeding the limit generates a warning-threshold-exceeded
log entry instead of a limit-exceeded log entry and permits routes
exceeding the limit to be added to the routing
table; if the route count fluctuates around the limit, an interval of five minutes must pass before another warning-threshold-exceeded
log entry can be generated
VRF Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
