mask-val

Syntax

[ no ] mask-val value

Release Information

Command introduced before JUNOSe Release 7.1.0.
Color Mark Profile Configuration mode added in JUNOSe Release 7.2.0.

Description

Sets the mask value. For rate limits, use this command with the committed-action, conformed-action, and exceeded-action commands. For color-mark profiles, use the mask-val command in Color Mark Profile Configuration mode. The no version restores the default value, 255.

Options

• value—Mask value in the range 0–255. Use the following mask values to set the appropriate bits in the ToS field of the IP packet header:
  • IP Precedence—0xE0 (three most significant bits)
  • DS Field—0xFC (six significant bits)
  • TOS (IP) or Traffic Class field (IPv6)—0xFF (default)

Color Mark Profile Configuration, Rate Limit Profile Configuration

Related Topics

• Creating a Two-Rate Rate-Limit Profile
• Setting the Mask Value for MPLS Rate-Limit Profiles
• Setting the Mask Value for IP and IPv6 Rate-Limit Profiles

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.