mark-exp

Syntax

[ no ] [ suspend ] mark-exp expValue [ mask expMask ] [ profile ProfileName ]

Release Information

Command introduced before JUNOSe Release 7.1.0.
profileName variable added in JUNOSe Release 7.2.0.

Description

Defines an MPLS policy rule that specifies the value of the EXP bits. The no version removes the rule from the policy list; the suspend version temporarily suspends the policy rule; the no suspend version resumes application of a suspended rule.

Note: This command replaces the Policy List Configuration version of the mark-exp command, which may be removed completely in a future release.

Options

• expValue—EXP bit value assigned to packets; number in the range 0–7
• expMask—Mask applied to modify some of the EXP bits in IP packet; integer in the range 1–7
• profileName—Name of the rate-limit profile to be used in a policy (up to 40 alphanumeric characters)

Classifier Group Configuration

Related Topics

• Assigning Values to the ATM CLP Bit
• Policy Rule Precedence

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.