[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
log severity
Syntax
log severity { severityValue |
off | severityNumber }
[ eventCategory [ instanceTree ] | eventCategory instanceTree | eventCategory ]
no log severity [ severityValue | off | severityNumber ] [ eventCategory
[ filters | instanceTree ] | eventCategory { filters | instanceTree } | eventCategory | * ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets the severity level for systemwide logs (that
is, when no individual event category is specified) or for a specific
event category. The no version returns
severity changes to their default settings or the systemwide setting.
 |
Note:
After you change the log severity level for an individual
log event category, you cannot use systemwide commands to subsequently
change the severity level for that category. To change individually
altered log event categories using systemwide commands, you must first
change the log event back to its default setting.
|
Options
-
severityValue and severityNumber—Minimum severity of the log messages displayed for the selected category;
described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7. The lower the number, the higher the
priority:
- emergency or 0—System unusable
- alert or 1—Immediate action
needed
- critical or 2—Critical condition
exists
- error or 3—Error condition
- warning or 4—Warning condition
- notice or 5—Normal but significant
condition
- info or 6—Informational message
- debug or 7—Debug message
- off—Disables systemwide log severity for all default
level event categories when no event category is specified or disables
log severity for a specified event category
-
eventCategory—Log category;
refer to the CLI online Help for available options
- filters—Removes all log filters for the event category
-
instanceTree—Log-specific filter
parameters; refer to the CLI online Help for available options
- *—Resets all log severities, systemwide and individual,
to default settings
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
