ipv6 ospf transmit-delay

Syntax

ipv6 ospf [ processId ] transmit-delay transmDelay

no ipv6 ospf [ processId ] transmit-delay

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the estimated time it takes to transmit a link-state update packet on the interface. The no version restores the default value.

Options

• processId—Integer in the range 1–65535
• transmDelay—Link-state transmit delay, a number in the range 0–3600 seconds; default value is 1 second

Interface Configuration, Subinterface Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.