[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ipv6 classifier-list
Syntax
ipv6 classifier-list classifierName [ traffic-class trafficClassName ]
[ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ]
[ source-route-class routeClassValue ] [ destination-route-class routeClassValue ]
[ local { true | false
} ]
[ source-address ipv6Prefix | source-host ipv6Address ]
[ destination-address ipv6Prefix | destination-host ipv6Address ]
[ precedence precNum | dsfield dsFieldNum | tcfield tcFieldNum ]
[ protocol [ protocolQualifier ] ]
no ipv6 classifier-list classifierName [ classifierNumber ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Creates or modifies an IPv6 classifier control
list. The no version removes the classifier
control list.
Options
-
classifierName—Name of the
classifier control list entry
-
trafficClassName—Name of the
traffic class to match
- green—Matches packet color to green, indicating
a low drop preference
- yellow—Matches packet color to yellow, indicating
a medium drop preference
- red—Matches packet color to red, indicating a high
drop preference
-
userPacketClassValue—User
packet value to match
-
routeClassValue—Value of the
source or destination route-class; in the range 0–255
- local—Specifies traffic destined for this interface
- true—Matches packets that are locally destined
- false—Matches packets that are not locally destined
-
ipv6Prefix—Prefix that defines
the IPv6 interface or network
-
ipv6Address—Base IPv6 address
of the network route
-
precNum—Upper three bits of
the traffic class byte; in the range 0–7
-
dsFieldNum—Upper six bits
of the traffic class byte; in the range 0–63
-
tcFieldNum—Whole eight bits
of the traffic class byte; in the range 0–255
-
protocol—Protocol type to
match; tcp, udp, icmpv6, or protocol number in the range
0–255
-
protocolQualifier—Specifies
the following protocol-specific parameters:
For TCP and UDP:
- source-port or destination-port—Specifies that a
source or destination port is matched
-
portOperator—One of the following
classifier parameters. See Creating or Modifying Classifier Control Lists for IPv6 Policy Lists for details.
- lt—Less than
- gt—Greater than
- eq—Equal to
- ne—Not equal
- range—Range of port numbers
-
portNumber—Port number of
the source or destination port
For TCP only:
- tcpFlag; a logic equation that specifies flag bit values;
! means logical NOT and & means logical AND; use any of the
following flag names:
- ack—0x10
- fin—0x01
- psh—0x08
- rst—0x04
- syn—0x02
- urg—0x20
For ICMPv6:
-
icmpType—ICMP message type
-
icmpCode—ICMP message code
-
classifierNumber—Index of
the classifier control list entry to be deleted
 |
Note:
The local-input keyword for
the ipv6 policy command is deprecated,
and may be completely removed in a future release. The keyword should
be removed from scripts.
You should recreate any local input policies using
the ipv6 classifier-list local true command
and attaching the policies using the ipv6 policy secondary-input command.
|
Global Configuration
Related Topics
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
