[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ip pim rp-candidate
Syntax
ip pim rp-candidate interfaceType interfaceSpecifier [ group-list accessListName ]
[ hold-time holdTime ] [
priority priority ] [ interval interval ]
no ip pim rp-candidate interfaceType interfaceSpecifier
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Defines a router as a rendezvous point (RP) router
candidate. The no version stops the router
from being an RP candidate.
Options
-
interfaceType—Interface type;
see Interface Types and Specifiers
-
interfaceSpecifier—Particular
interface; format varies according to interface type; see Interface Types and Specifiers. The autoRP announcement messages will contain
the IP address for this interface.
-
accessListName—Access list
containing the set of group prefixes supported by this C-RP. If no
group-list is specified, the default value is the entire multicast
address range.
-
holdTime—Amount of time in
the range 1–65535 seconds that the BSR keeps an RP in its C-RP
list if the BSR does not receive a C-RP advertisement message; default
value is 150 seconds
-
priority—Priority field value
in the range 0–255 that the C-RP sends to the BSR in C-RP advertisement
messages. In the RP election process, the RP with the lower priority
value is preferred; default value is 192
-
interval—Interval in the range
1–65535 seconds at which the C-RP sends advertisement messages
to the BSR; default value is 60 seconds
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
