[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ip dvmrp accept-filter
Syntax
[ no ] ip dvmrp accept-filter listName1 [ distance ] neighbor-list listName2
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Filters incoming DVMRP reports in accordance with
a standard IP access list. The no version
disables the filter.
Options
-
listName1—Name of the IP access
list. If the name is 0, the interface accepts all destinations. You
can specify a simple or extended access list; with an extended access
list you can specify an address and a subnet mask.
-
distance—Number in the range
0–255; default value is 0; the distance associated with the
DVMRP route when the router determines the RPF interface for the source
of a multicast packet
-
listName2—Name of an access
list containing the neighbors from which the router will accept reports.
If the name is 0, the interface accepts destinations from all its
neighbors.
Interface Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
