frame-relay lmi-t392dce

Syntax

frame-relay lmi-t392dce seconds

no frame-relay lmi-t392dce

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the polling verification timer (T392) on a DCE interface. The no version removes current setting and sets the default.

Options

• seconds—Number in the range 5–30 seconds; specifies the expected interval in seconds between status inquiries issued by the DTE equipment; default value is 15 seconds

Interface Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.