frame-relay lmi-t391dte

Syntax

frame-relay lmi-t391dte seconds

no frame-relay lmi-t391dte

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the link integrity verification polling timer (T391) on a DTE interface. The no version removes the current setting and sets the default.

Options

• seconds—Number in the range 5–30 seconds; specifies the interval in seconds between status inquiries issued by the DTE; default value is 10 seconds

Interface Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.