frame-relay lmi-n392dce

Syntax

frame-relay lmi-n392dce threshold

no frame-relay lmi-n392dce

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the error threshold counter (N392) on a DCE interface. The no version removes current setting and sets the default.

Options

• threshold—Positive number in the range 1– 10; number of errors that will place the interface in an operationally down state; default value is 2 errors

Interface Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.