frame-relay lmi-n391dte

Syntax

frame-relay lmi-n391dte keepExchanges

no frame-relay lmi-n391dte

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the full-status polling counter (N391) on a DTE interface. The no version restores the default value, assuming an LMI has been configured.

Options

• keepExchanges—Number in the range 1– 255; default value is 6; number of keep exchanges to be done before requesting a full-status message. If you specify a value of 1, you receive full-status messages only.

Interface Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.