[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
enable secret
Syntax
enable secret [ level securityLevel ] [ secretType ] secretText
no enable secret [ securityLevel ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets a secret to control access to certain types
of commands. The no version removes the
secret requirement.
 |
Note:
On the E-series router, all secrets are stored as encrypted
secrets.
|
Options
-
securityLevel—Security level
for which you want to set the secret; default value is 5
- 0—Allows the user to execute the help, enable, disable, and exit commands
- 1—Allows the user to execute commands in User Exec
mode plus commands at level 0
- 5—Allows the user to execute Privileged Exec show commands plus the commands at levels 1 and 0;
this is the default level
- 10—Allows the user to execute all commands except
support commands, which may be provided by Juniper Networks Customer
Service
- 15—Allows the user to execute support commands
-
secretType—One of the following:
- 0—Indicates that the secret is unencrypted; this
is the default
- 7—Indicates that the secret is encrypted
-
secretText—Secret, either
encrypted or unencrypted, depending on the secret type
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
