[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
enable password
Syntax
enable password [ level securityLevel ] [ passwordType ] passwordText
no enable password [ level securityLevel ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets a password to control access to certain types
of commands. The no version removes the
password requirement.
 |
Note:
On the E-series router, all passwords are stored as encrypted
passwords.
|
Options
-
securityLevel—Security level
for which you want to set the password; default value is 5; commands
generally fall into one of the following security/privilege levels:
- 0—Allows the user to execute the help, enable, disable, and exit commands
- 1—Allows the user to execute commands in User Exec
mode plus commands at level 0
- 5—Allows the user to execute Privileged Exec show
commands plus the commands at levels 1 and 0; this is the default
level
- 10—Allows the user to execute all commands except
support commands, which may be provided by Juniper Networks Customer
Service
- 15—Allows the user to execute privilege setting
and support commands
-
passwordType:
- 0—Specifies that an unencrypted password follows;
this is the default
- 7—Specifies that an encrypted password follows
-
passwordText—Password, either
encrypted or unencrypted, depending on the password type
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
