[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
debug ip rip
Syntax
debug ip rip ripLog [ severity
{ severityValue | severityNumber } ]
[ verbosity verbosityLevel ]
no debug ip rip ripLog
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Shows information about the selected variable.
The no version disables the display.
Options
-
ripLog—RIP log of interest;
one of the following options:
- events—General RIP events, such as removing RIP
from an interface or creating the RIP process
- route—Events associated with two RIP routers exchanging
routes
- severity—Specifies the minimum severity of the log
messages displayed for the selected category; described either by
a descriptive term—severityValue—or
by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the
priority:
- emergency or 0—System unusable
- alert or 1—Immediate action
needed
- critical or 2—Critical condition
exists
- error or 3—Error condition
- warning or 4—Warning condition
- notice or 5—Normal but significant
condition
- info or 6—Informational message
- debug or 7—Debug message
-
verbosityLevel—Verbosity of
the log category's messages; can be any of the following:
- low—Terse
- medium—Moderate detail
- high—Verbose
Privileged Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
